Bay Networks BayStack ARN Routers none Wartungshandbuch PDF herunterladen (Seite 50)

Installing and Operating BayStack ARN/DC Routers

1-26

116273-B Rev 00

Connecting a Terminal Console

You need the following items in the ARN/DC console/modem cable kit (Order

No. 110310) to connect a terminal console:

• Serial console/modem cable with 9-pin receptacle to 25-pin plug connectors

(Order No. 110307)

• Null modem crossover adapter with two 25-pin receptacle connectors

(Order No. 110308)

Once you have the appropriate equipment, complete the following steps:

Turn on and configure the terminal console using the parameters in

Table 1 -7

and the instructions in the terminal documentation.

Turn off the terminal.

Insert the 9-pin receptacle end of the console/modem cable into the

back-panel Console interface connector (refer to Figure 1-15 on page

1-22).

Attach one end of the null modem crossover adapter to the cable’s 25-pin

plug connector, then tighten the screws (refer to Figure 1-16 on page

1-22).

Attach the other end of the null modem crossover adapter to the terminal

interface, often labeled Host.

Table 1-7. Console Parameters

Parameter Value

Baud rate 9600

Data bits 8

Stop bits 1

Parity None

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 151 152

Keine Kommentare

Bay Networks BayStack ARN Routers none Wartungshandbuch Seite 50