Bay Networks CM 100 Bedienungsanleitung PDF herunterladen (Seite 6)

Table 3: BayStack 250 Series 10/100 Autosense Hubs Technical Specifications (continued).

Electrical Specifications

Input voltage 100-240 VAC

Volt amperes rating 250 VA

Power consumption

BayStack 250 30 W

BayStack 253, 254, 255 50 W

AC line frequency 50 to 60 Hz

Thermal rating

BayStack 250 103 BTU/hr maximum

BayStack 253, 254, 255 94 BTU/hr maximum

Physical Specifications

Weight

BayStack 250 6.2 lb. (3.0 kg)

BayStack 253 6.9 lb. (3.3 kg)

BayStack 254 6.1 lb. (2.9 kg)

BayStack 255 6.3 lb. (3.1 kg)

BayStack 250-1FX .14 lb. (.064 kg)

Dimensions

BayStack 250-255 (H) 1.73 in. x (W) 17.2 in. x (D) 8.48 in. [(H) 4.4 cm x (W) 44.1 cm x (D) 21.7 cm]

BayStack 250-1FX (H) 1.5 in. x (W) 3.8 in. x (D) 3.9 in. [(H) 3.7 cm x (W) 9.7 cm x (D) 9.9 cm]

Rack space One rack unit per hub (19 inch)

Environmental Specifications

Operating temperature 0° to 50° C

Storage temperature -20° to +65° C

Operating humidity 20% to 85% max. relative humidity, non-condensing

Storage humidity 5% to 90% max. relative humidity, non-condensing

Operating altitude Up to 10,000 ft (3000 m)

Storage altitude 10,000 ft (3000 m)

Ventilation clearance Minimum 2 in. (5.08 cm) on all sides (stacking OK)

Operating conditions At least 6 ft. (1.83 m) to nearest source of electromagnetic noise

Power source availability Adequate power source within 6 ft. (1.83 m)

Rec. wiring closet service clearance 5 in. (front); 7 in. (rear)

BayStack 250 Series 10/100 Autosense Hubs Data Sheet

1 2 3 4 5 6 7 8

Keine Kommentare

Bay Networks CM 100 Bedienungsanleitung Seite 6