Bay Networks ATMSpeed Spezifikationen PDF herunterladen (Seite 38)

Interface Extensions Conﬁguration

This view provides the following information:

Conﬁguration Views Bay Networks Centillion 100

3-10 Management Module Guide

Local Loop

This ﬁeld indicates whether local loop is enabled or disabled. 1 = enabled and

2 = disabled.

Remote Loop

This ﬁeld indicates the status of loop timing. 1 = enabled and 2 = disabled.

When the port is disabled no SONET signal is generated and no cell trafﬁc is

generated or accepted.

Force HEC Error

This ﬁeld indicates the status of forcing cell header checksum error. 1 =

enabled and 2 = disabled.

Scrambling

This value indicates the status of scrambling. 1 = enabled and 2 = disabled.

Interface Extensions Conﬁguration

This view contains more detailed network configuration information for the

Interface Extensions. To access this view:

1. Highlight the Device Icon within the device view.

2. Select IF Extensions from the Icon Subviews menu.

This view provides the following information:

Index

A unique value representing each interface.

Card

The card number associated with this interface.

Port

The port number associated with this interface.

Filter Enable

The state of ﬁltering on this port. If TRUE, then ﬁlters are enabled. The ﬁlter

port table will become valid when ﬁlters are downloaded to the port via setting

the cnIfFilterDownload object. In the high-perfomrance mode, ﬁlters will

be disabled on all ports execpt the management port

Forwarding Identiﬁer

This object references the correspsonding instance in the MIB object which

describes the ports forwarding function. For example, if the port is

participating in bridging, then this object contains the OID of the

bridgeGroupPortTable. If this information is not present, its value is set to

the OBJECT IDENTIFIER { 0 0 }.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 73 74

Keine Kommentare

Bay Networks ATMSpeed Spezifikationen Seite 38