Bay Networks 5391 Installationsanleitung PDF herunterladen (Seite 41)

2-5Remote Annex 6300 Hardware Installation Guide

Chapter 2 Installing the Remote Annex 6300

Attaching the Mounting Bracket to the Remote Annex 6300

Attach the rear mounting bracket to the Remote Annex 6300 as

follows:

1 Remove the mounting brackets and hardware kit from its package.

2 Remove two screws from the rear of the cover on each side of the

Remote Annex 6300, as shown in

Figure 2-3. Save these screws; you

will need them later to install the rear mounting bracket.

3 Install rear mounting brackets to the device using the four screws

previously removed and the additional hardware supplied in the

hardware kit.

4 Tighten the screws to secure the bracket to the device.

Figure 2-3. Attaching the Mounting Bracket to the Remote Annex 6300

Bracket Mounting

(2 Screws each side)

Bracket Assembly

(2 Screws, 2 Nuts, and 

4 Washers each side)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 137 138

Keine Kommentare

Bay Networks 5391 Installationsanleitung Seite 41