Bay Networks Remote Annex Bedienungsanleitung PDF herunterladen (Seite 33)

Configuring the Nortel Networks Remote Access Concentrators and the DMS-10 for Remote Access.March 31, 1999 33

Options Local: Remote:

MRU 1500 1500

Auth type CHAP None

ACFC On On

ACCM 00000000 000a0000

Magic 0x15634a10 0x000c2fe7

PFC On On

MRRU 1500 1500

Short Sequence Off Off

Endpoint Disc 0:0 0:0

*** NCP (IPCP) Status ***

State Current: Open Prior: Ack received

Options Local: Remote:

IP addresses 47.39.240.40 [ANX] 47.39.240.52 [SECSERV]

Compression None None

*** Security (CHAP) Status *

State: Local: OUT_UP Remote: IN_INIT

*** NCP (MP) Status ***

State Current: Closed Prior: Closed

The asy printout is similar to the syn printout. If other protocols were declared in the PPP

setup (ppp_ncp prompt) they will be displayed. The setup for the RAC being displayed

has ppp_ncp set to ipcp and mp. If more protocols were selected the netstat -ip will show

their status.

5.5.11.2.4 Routing Tables (netstat -r)

This command will display the routing tables which reside in the RAC. These tables are

most likely constructed using RIP and building from information given by other routers.

The command serves to verify that routing information is being obtained from neighbor-

ing routers. The command is “netstat -r”, this will display the routing tables as below:

annex# netstat -r

Routing tables

Destination NextHop Flags Usage UseCount Mtr Interface

0 - 65534 65292.181 UHF 0 0 0 en0

IP default 47.39.240.1 UR -9891 916 2 en0

47.39.48.0/20 47.39.240.1 UR -10405 402 2 en0

47.39.52.55 47.39.240.1 UR -10807 0 3 en0

47.39.52.56 47.39.240.1 UR -10807 0 3 en0

47.39.224.0/20 47.39.240.1 UR -10807 0 2 en0

47.39.240.0/20 * UI fixed 3279 1 en0

47.39.240.50 * UI fixed 0 1 mp1 (ppp)

Bay Networks Remote Annex Bedienungsanleitung Seite 33