Bay Networks Remote Annex Bedienungsanleitung PDF herunterladen (Seite 37)

Configuring the Nortel Networks Remote Access Concentrators and the DMS-10 for Remote Access.March 31, 1999 37

Controlled Slip Event: 0

Unavailable Signal State: Clear

94 other blocks .

Interval # 95 Statistics:

time unknown

Number of valid seconds: 900

Errored Seconds: 0

Severely Errored Seconds: 0

Bursty Errored Seconds(ESF only): 0

Unavailable Seconds: 0

Controlled Slip Seconds: 0

CRC6 Error Event(ESF only): 0

ESF Error Event(ESF only): 7

Severely Errored Framing Event: 0

Frame Sync Bit Error Event: 0

Out of Frame: 0

Loss of Frame Count: 0

Line Code Violation Event(BPV): 0

Controlled Slip Event: 0

Unavailable Signal State: Clear

This command is very useful in troubleshooting outages that occurred in the last 24 hours.

5.5.11.5 Clearing Statistics

The clear command is similar to the other commands except the function is clear. The

command is in the form of stats -T [clear [history | statistics] | current | total | all]

[wan1|wan2]. The Clear command must be followed by either history or statistics and then

the associated WAN must be entered. The “history” option clears the 24 hour period while

the “statistics” option only clears the current record.

Below is a example of clearing the current interval.

annex# stats -T clear statistics wan1

cleared interval statistics on wan1

Similarly to clear the history and alarm history:

annex# stats -T clear history wan1

cleared alarm history on wan1

1 2 ... 32 33 34 35 36 37 38

Keine Kommentare

Bay Networks Remote Annex Bedienungsanleitung Seite 37